Vokey Design Wedges - Recent Threads

I’m a believer

JStribling — Thu, 09 Jul 2026 02:31:57 GMT

Well, I was primarily a Cleveland wedge player and like an idiot, I lost my 56 at the course. I happened to look on golf galaxy and found a sale on a sm9 58 m grind. I couldn’t pass it up and pulled the trigger. I am now looking to replace every wedge in my bag! The m grind and feel off the face is absolutely amazing!

Whats your favorite grind on your 60?

Eric H — Thu, 19 Mar 2026 10:56:30 GMT

Id love to hear what people are using in their 60 degree wedges, whats your favorite vokey grind and why?

RE: Whats your favorite grind on your 60?

Lou G — Mon, 06 Jul 2026 16:27:56 GMT

Here's my complete arsenal. The left image is my extended wedge setup. I also optimize the bounces on my wedges. I'm using a Wedgeworks 44F (42*) as a "9 iron". My "pitching wedge" is a 50-12F set to 48*. It also can be used for longer bunker shots. Sand wedge is a 56-12D set to 54* and club length of 35". These are quite versatile. The 58-06K is probably THE most versatile lob wedge. 2nd place is 60-04T but there is a difference of 5 yards in full swing distance vs LBK. In the upper right corner is a 3 wedge setup with a local vendor's 60/10 (59*), a Callie style full face wedge. The bottom right is for course condition and would replace the 58-06K.

RE: what wedges?

Brian A — Mon, 06 Jul 2026 13:26:40 GMT

Great choices .... also the gapping is spot on .... my vokey wedges are gapped by 4 degrees as well

what wedges?

Roan B — Tue, 26 May 2026 16:23:51 GMT

I am a 10 handicap at the age of 15 and i am looking for wedges. I have some older volkey wedges and i love them but i am getting a whole new set of titlest clubs and i just need some guidance.

bounce and grind

fred c — Sun, 28 Jun 2026 18:35:41 GMT

I'm currently playing SM 9s 54.10 S and 58.10 S. I also carry the 48 gap. My question is this...I'm a 15 and I don't take a big divot, probably the result of practicing off of range mats. Am I using the correct bounce and grind?

[View:http://www.titleist.com/discussion-images/jpg//teamtitleist/cfs-file/__key/acushnet-telligent-discussions-attachments/discussions-299-00/k6teqdgmxxjumfs1mt0c:550:0]

RE: bounce and grind

Dan B — Sun, 05 Jul 2026 20:11:53 GMT

Try and get yourself a fitting that uses Trackman or GC quad as they should have access to the Vokey fitting software.

The bounce you need will depend on your angle of attack and the course conditions that you mostly play on.

I know this probably isn’t the answer that you’re looking for, but it’s the best way of finding the correct bounce/grind for you

RE: what wedges?

Lou G — Sun, 28 Jun 2026 21:32:40 GMT

Vokey gapping is 42-48-54-60 with T and K on the 60 for course conditions. Other lob/XW option is 59-64.www.titleist.com/.../fhwvcoa4tdnqow07ltpw www.titleist.com/.../m8xs8ijnkzupkwgbvsth

RE: Wedgeworks 44F

Lou G — Sat, 27 Jun 2026 23:44:52 GMT

Still going. Holed out on a 50 yard approach shot a couple months ago.

50-12F to 48* as a PW.www.titleist.com/.../k8ukymcovpn8297g3rgp

Wedgeworks 44F

Lou G — Sat, 15 Nov 2025 01:03:58 GMT

How many here have used it. I got one used for $189 and it had an NSPro950 S. I set it up to play as a 9 iron (42*). I liked the shaft so much that I reshafted my 620CB 8 iron.

[View:http://www.titleist.com/discussion-images/jpg//teamtitleist/cfs-file/__key/acushnet-telligent-discussions-attachments/discussions-299-00/gncdvkbjfultut6hqlpc:550:0]

High bounce K for 54/56

John W — Sun, 09 Mar 2025 04:32:41 GMT

Anyone else wish Vokey would offer a high bounce K in the sand wedge lofts? I understand the more modern approach is to use the lob wedge out of the sand, but I'm a bit more old school and like to use my sand wedge out of the sand most of the time and have a low bounce lob wedge. I just received my 60.06K today but would love a 54.14K as well. I've had 54.14F and 54.12D and like them both well enough, but I feel the 54.14K would be perfect.

RE: High bounce K for 54/56

Lou G — Sat, 27 Jun 2026 23:38:47 GMT

If you do a lot of open face shots D and T grind. K and low bounce K are meant more for digging shots. For 2 years my combo was 58-12D (57*) and 60-06K. I played 58-14K (56*) for 3 years. I used to use LBK for wet bunkers and off firm lies. Now that I've discovered the idiosyncrasies of T grind, it has been my lob wedge for a year now. www.titleist.com/.../oh0thhd1sgc9hpskjapu

RE: standard gapping PW , GW, with vokey 54' and 58'

Lou G — Sat, 27 Jun 2026 23:05:38 GMT

42-48-54-60 in thumbnail and first image. 2nd image is for course conditions. PM Grind 64/10 drop in or replace 60-04T with 60-12D and 64T.www.titleist.com/.../tjs6bx5w810dvk7yu0ot www.titleist.com/.../uziqmh7it49eoskoqrxm

standard gapping PW , GW, with vokey 54' and 58'

AGibson — Sun, 28 Dec 2025 16:01:23 GMT

recently purchased 54' and 58' vokey wedges, to compliment the standard T-300 irons. I get these clubs well, but wondering if the gap between the 48 and the 54 is little too much. Any, all opinions are appreciated.

Length of wedges

JPheffer — Tue, 23 Jun 2026 17:09:30 GMT

So my Titleist T250 set is 1/2" long and 2 degrees flat. 43 degree pitching wedge is 36.25". My wedges are 48, 53, 58. Do you all just extend those 1/2" as well or do you play them all at the same length as your pitching wedge. I have read all sorts of variations. Also I assume your wedges should be 2 degrees flat as well?

RE: Length of wedges

Lou G — Sat, 27 Jun 2026 12:23:33 GMT

[quote user="Lou G"]I play my 44F at 35.75". All others are 35" 64* lie angle.

[/quote]

Cases in point for 56-08M and 56-12D. More prone to "hosel rockets" or pulls before with too upright of a lie angle or too long of a shaft. I had also had issues with a 48-10F (46*) with an occasional shank or pulled shot.

There was a period where I was doing very well with a 54-10S (52*). Played it as a gap wedge for 3 years. I played 695MB 7-P set 1/2" short and 1* upright. Now I remember the club length of the 54S was 35"

Used to have a hard time with a 50 or 52 GW.

Been doing well with 44F for some time now.

I've been pretty comfortable using a 58-14K or 58-12D as a sand wedge since 2019. Even with 65* lie angle.

Had the fitter check the lie angle of the 44F. 64*. Once I set the lie angle of the 52-12F to 64* no problem. I just recently went to 50-12F set to 48* and that is now my "PW".

I shortened the lengths of the 56-08M and 56-12D to 35". One thing now is no issue with full swings. I use the M (55*) when I bring a 60-12D (59*) for course conditions. 56-12D (54*) is a good general purpose SW. 60-04T is my lob wedge.

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 04:34:18 GMT

[quote user="Colin H"]I used the M grind in my 60 for years, but just recently switched to a 60 12D, and I love it. I live in PA and the course conditions can greatly vary between courses here. Because I am a lefty, I don't find myself in as many bunkers as others, so haven't had much testing with it out of sand yet.

I am looking to purchase a 60 K grind though - I've heard great things about it for tight lies, and folks seem to really like them.

[/quote]

If you tend to be a digger, both K and low-K are great. D and T are better for flop shots but about equal to the two Ks from soft lies.

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 04:14:43 GMT

[/quote]

I played K grind (58-14K) bent 2* strong between 2019-2023. Was alternating between K and 58-12D (56*) between 2023-2024. Between mid 2024 until 2025, my go to combo was 58-12D (57*) and 60-06K. Where D wins out over K grind is open face or flop shots. Once I figured out the idiosyncrasies of T grind, I've been using 60-04T for greenside bunkers and flop shots.

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 04:04:15 GMT

[quote user="SHAWN E"]I recently added the 60 K* and it is literally a cheat code. With the lead edge grind and the low bounce make this wedge a weapon..

[/quote]

I briefly tried out a 58K* set to 59*. Great out of soft sand but 60-06K is better off hard lies.

I also had 58V. Fantastic in soft bunkers. Not as good as D grind off firm lies.

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 03:59:39 GMT

[quote user="J22abe"]T Grind. Love it. I can open that thing up so flat, I can easily flop off fairway lies. I strictly use it as an oh shi...!! club.

Anything from 60 and out, I'll use my 54.10S, and 50-30yds is my 60. 60-50 is 54 or 60 depending on what I'm feeling at the time. I used to use 60 at 40 and 54 at 50yds but I started hitting my wedges longer a year ago, and a 50yd with my 54 is harder to control now, since I'm only taking the club back to like 8 o'clock.

Mostly chip with the 54 straight up, and only chip with the 60 if I need it to land softer and open up more than 54. Other than that it's the club if I have to get it up and over something and land and stop on a time. The T Grind allows me to do that from any lie on the golf course.

[/quote]

For me S grind is very limited. It's great for pitch shots and chipping but leaves a lot to be desired in sand. Doesn't lend itself too well for flop shots.

For what it's worth, I have a pic of the 60-12D and 60-04T alongside. They perform equally well in soft sand and most pitching. Where T grind wins out is a severe downhill lie on hard pan.... picks the ball better.

Not a tremendous difference between 56-08 M (55*) and 56-12D (54*). I use the M and 60-12D in place of 56-12D (54*) for unknown course conditions.

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 03:27:23 GMT

[quote user=" Josh "]I used to love my M grind, especially because I liked being able to open the face around the greens. But after taking part in a short game clinic and getting properly fit, I ended up with a low bounce K grind and honestly it made everything way easier for me. Bunkers, tight lies, little shots around the green — it just feels so much more forgiving and confidence inspiring. I still think the M is awesome, but the K definitely surprised me.

[/quote]

I played K grind 2* strong between 2019-2023. I also had a combo of 58-12D (57*) and 60-06K that i used from mid 2024 until recently. Now that I've figured out the idiosyncrasies of T and M grinds ..... www.titleist.com/.../hw34gmkbrt5whpw9vxre www.titleist.com/.../yekvtfjckp87yogpblmn

RE: Whats your favorite grind on your 60?

Lou G — Sat, 27 Jun 2026 03:22:00 GMT

My carry bag is shown. 56-12D (54*) for a sand wedge and 60-04T for lob wedge.

For unknown course conditions, replace the 56-12D with 56-08M (55*) and 60-12D (59*). There are a couple courses where I add the PM Grind 64/10 ("Phil 64"). The images are below.

www.titleist.com/.../hw34gmkbrt5whpw9vxre www.titleist.com/.../yekvtfjckp87yogpblmn

RE: Length of wedges

Chuck Zirkle — Thu, 25 Jun 2026 16:01:16 GMT

This is something I take up with my fitter when I get new clubs. Have trusted him for over 20 years. Everyone is different. Just saying.

RE: Whats your favorite grind on your 60?

J22abe — Thu, 25 Jun 2026 01:21:19 GMT

T Grind. Love it. I can open that thing up so flat, I can easily flop off fairway lies. I strictly use it as an oh shi...!! club.

Anything from 60 and out, I'll use my 54.10S, and 50-30yds is my 60. 60-50 is 54 or 60 depending on what I'm feeling at the time. I used to use 60 at 40 and 54 at 50yds but I started hitting my wedges longer a year ago, and a 50yd with my 54 is harder to control now, since I'm only taking the club back to like 8 o'clock.

Mostly chip with the 54 straight up, and only chip with the 60 if I need it to land softer and open up more than 54. Other than that it's the club if I have to get it up and over something and land and stop on a time. The T Grind allows me to do that from any lie on the golf course.

RE: Great wedge fitting

Jason R — Wed, 24 Jun 2026 12:15:41 GMT

Wedge fitting is an overlooked session I find. Folks are all about driver and iron fittings (and rightly so), but skip proper (professional) wedge and putter fittings. Enjoy the new wedges!